ACP-FX-N2/125> Virtex-4FX based Analog Capture card

The ACP-FX-N2/125 is a 64-bit 66MHz CompactPCI FPGA based Analog capture card. The architecture is based on the XRC series and uses Alpha Data's Software Development Kit. The ADP-FX-N2 supports 9 125MHz 14-bit ADC input channels.     Digital   Feature Specification Format 6U Compact PCI PCI Bus 64-bit 66MHz PCI or 64-bit 133MHz PCI-X interface in separate bridge device. Quad DMA controllers, FIFO and interrupt controller with a peak data rate of 1066 MByte/sec FPGA Virtex-4 FX100 or FX140 Memory SDRAM 1024MB in 4 independent banks of DDR-II DRAM - 4 banks of 256MB each Flash 16MBytes I/O 9 Channel 125MHz 14-bit ADC External Clock input 2 GigE ports rear panel J3 rear panel J5 Clocks Local bus clock programmable up to 100MHz for transfers between PCI bridge and User FPGA. High performance user clock programmable up to 500MHz using LVPECL with very low jitter. Additional 200MHz reference clock for IOB delay circuits. Configuration PCI Bus direct to SelectMAP port From Flash direct on power up External JTAG connector SelectMap Download and read-back performance up to 256MB/s peak. Software Drivers for WinNT, 2000, XP, Linux and VxWorks API with template designs in VHDL and Verilog Analog       Feature Specification Feature Specification Channels 9 Input Range +/-2V Resolution 14-bit SNR >65dB fmax 125MHz SFDR >80dB Trigger 9 x TTL B/W 10-200MHz Ext Clock 1 x 50 Ohm AC     Ordering Information ACP-FX-N2/125/xxxx-yy parameter description options xxxx yy Virtex-4 device Virtex-4 speed FX100 or FX140 10, 11, 12 Environmental Options AC0   Hardware Manual Function Reference Manual

(C) Copyright 2006 Alpha Data. All Rights Reserved