 |
 > Datasheets
ADPe-XRC-4> Xilinx Virtex-4 FX PCI Express
|
|
|
|
|
The ADPe-XRC-4 is a high performance
reconfigurable PCI Express card based
on the Xilinx Virtex-4FX range of
Platform FPGAs. Features include high
speed PCI Express interface, external
memory, high density I/O, programmable
clocks, health monitoring, battery
backed encryption and flash boot facilities.
A comprehensive cross platform API
with support for WinNT/2000/XP, Linux
and VxWorks provides access to the
full functionality of these hardware
features.
|
|
|
| Feature |
Specification |
| FPGA |
Xilinx Virtex-4
FX100 or FX140
FF1517 footprint
|
| PCIe
Bus |
PCI Express 2.0 compliant x8, x4, x2 or
x1 with 64-bit 100MHz Local Bus interface
to target FPGA. Twin DMA controllers, FIFO
and interrupt controller peak data rate
2.5GBytes/sec full duplex
|
| Memory |
SSRAM
4MByte or 8 MByte in 1 bank DDR-II SSRAM
SDRAM
1 GByte in 4 independent banks DDR-II SDRAM
Flash
16MBytes
|
|
I/O |
Up to 146 I/O via a range of XRM front
panel adapters
RocketIO - 8 x 3.125 / 6.25 Gb/sec MGT
Programmable signalling levels of 2.5V or
3.3V
|
| Clocks |
Local bus clock
programmable up to 100MHz for transfers between
PCI bridge and User FPGA.
High performance user clock programmable up
to 500MHz using LVPECL with very low jitter.
Additional 200MHz reference clock for IOB
delay circuits.
|
| Configuration |
PCIe Bus direct to SelectMAP
port
From Flash direct on power up
External JTAG connector |
| SelectMap |
Download and read-back
performance up to 100MB/s peak.
|
| IP Protection |
Dual battery back-up for encryption
keys via XRM
|
| Software
|
Drivers for WinNT, 2000, XP,
Linux and VxWorks
API with template designs in VHDL and Verilog |
| Environmental
|
Temperature
Operating Temperature 0 to +55 degrees C
Non-Operating(Storage) Temperature -40 to
+65 degrees C
Operating Humidity 5% to 90% at 40 degrees
C non-condensing
Non-Operating(Storage) Humidity 5% to 90%
at 40 degrees C non-condensing
EMC
FCC 47CFR Part 2
EN55022 Equipment Class B
|
| Ordering
Information |
ADPe-XRC-4/xxx-yy/(I/O)
|
| parameter |
description |
options |
xxxx
yy
IO
|
Virtex-4 device
Virtex-4 speed
Front Panel Adapter
|
FX100 or FX140
10, 11, 12
XRM-IO146 (std),
XRM-IO34, XRM-ADC,
XRM-DAC, XRM-DDR,
XRM-FPDP, XRM-MDR26,
XRM-ZBT, XRM-RIO,
XRM-ETH, XRM-CAMERALINK,
XRM-OPT, XRM-HSSDC-2
|
|
|
|
|
(C) Copyright 2006 Alpha Data. All Rights Reserved
|
|
